GDB remote Customer support email: garagedoorbuddy@gmail.com 1. Is my garage door compatible? Check this article. http://forum.brocel.com/2016/06/04/which-garage-door-openers-are-not-compatible-with-gdb-remote-2-0/ 2. The GDB device doesn’t show up in the ‘My Devices’ list after initial setup. Or it was working but suddenly stopped working. Is the LED on the GDB device solid green? If no, that means the GDB device…
If you know how to solder wires, check this link. https://forums.lutron.com/showthread.php/987-Chamberline-MYQ-openers-not-compatible-with-RA2-Visor-Control
Android: Go to the control screen of the GDB App where you see two big buttons.Tap “Settings Icon” on top right. Then tap “Firmware Upgrade”. Then tap “Firmware Upgrade” button to upgrade the firmware. If internet mode is enabled, disable internet mode first before doing firmware upgrade. Internet mode can be disabled in “Remote Accesss…
One of our customers used VPN to enable internet access for GarageDoorBuddy Remote. Here’s the setup. Mounted GDB with zip ties, then plugged it into a digital programmable timer so that it I can make it power cycle every month (or more frequently) if needed. I didn’t use the double sided tape because I wanted…
These openers are NOT compatible. 1. Liftmaster/Chamberlain/Craftsman/Raynor security+2.0 openers are not compatible. If the learn button on your Liftmaster/Chamberlain/Craftsman/Raynor is yellow, that means it is security+2.0. To support these openers, a customized adapter is required. You can purchase the customized adapter from us. Contact us at garagedoorbuddy@gmail.com to purchase an adapter. 2. Genie Series III…
Yes, by default you will get notified when the door is left open for 15 minutes and the reminder will repeat every 15 minutes. You can change the notification time to be any time between 1 minute and 60 minutes when the door is left open. And if you don’t want to get notified when…
Yes, you can.
Number of beeps Type of beep Stage Description 1 long during factory reset when perform factory reset 2 short and fast before setup/after factory reset waiting to be programmed with SSID/password 5 short and fast before setup battery is too low for setup 1 long during setup/after paired after device joins network successfully 3 short…
1. Power supply 2. Two sets of control wires. 3. GDB remote device. 4. Quick start guide.
During the setup, users need to add one monitor at a time. Connect the batteries for one monitor and follow the instructions to finish setup. Then connect batteries for another monitor, and follow the instructions to finish setup for the second monitor and so on.